%20with%20trademark%20registration%20mark.jpg)
Patent pending
Features
-
New injection equipment allows injection up to hair cracks
-
Densification from the surface of the frame by sealing with M&H fine particle cement
-
Since spring pressure is used, no load is applied to the Co structure.
-
Approximately 60% reduction in CO2 emissions compared to new construction
Origin
%20trademark%20registration%20mark.jpg)
because it is a next-generation construction method that extends the life of concrete water tanks by repairing them without dismantling or building new ones, and reduces CO2 emissions by about 60%.
Repair of repair, C of carbon, N of neutral, CO2 reduction rate about 60% to 6.0
"Repair method CN6.0"It was made.
About CN6.0 (English slide show)
Cost reduction
CO2 reduction
It costs about 300 to 400 million yen to build or renovate a 300t water tank, but the repair method CN6.0 reduces the cost by about 90% and can be constructed at a cost of about 30 million yen.
Comparing new installation and repair…Reduces CO2 emissions by approximately 60-65%!
97% reduction in CO2 emissions when comparing new construction + demolition
New construction…Ready concrete, reinforcing bars, formwork, heavy equipment, others
Dismantling…crushing and transporting, cutting of rebars, recycling processing machine, loading, recycled aggregate, etc.
Experiment at the Building Materials Testing Center
From cracks of 0.1mm to cracks of 0.05mm after injection
It has been proven to be injectable.
This repair method CN6With the new injection device used in .0, injection pressure of 0.11 N/㎟ can be injected into fine cracks. As a result, the concrete is densified and the water stoppage effect at the leaking point is obtained.
It is expected to be a "construction method that can regenerate and extend the life" that can be used continuously without dismantling aging concrete structures.
*Equipment used in experiments
The high-pressure injector (red) is the current new injection device (0.11N/mm)
(Company) Mie Prefectural Construction Materials Testing Center
From the injection speed test of high viscosity injection material
Outline of construction and materials used
thisUntil now, concrete crack repair has been done by V-cut, U-cut seal or low-pressure resin injection for cracks of 0.2 mm or more.
In addition, conventional capsule-type low-pressure resin injection could not be injected into cracks of 0.2 mm or less.
new injector*1and patented*2M&H+ particulate cement*3By using a combination of cement paste and special MH water, it is possible to densify the concrete to the minute parts and recover the deterioration of the structure.
*2 Water stoppage and repair method using completely inorganic injection material
M&H construction method
(Patent No. 5979805)
fillingimage
Actually filled with resin
MH
M&H+ fine cement*3
High-strength fine particle cement, the main material used in the patented M&H construction method for waterproofing and repairing construction methods using completely inorganic injection materials. It has a standard strength of 60N/㎟ or more (28 days), can be densified down to the smallest parts, and has water stopping properties.
Trademark registration No. 5869231
MH
MH water
Special liquid for M&H fine particle cement used in repair method CN6.0. By combining with M&H fine particle cement, it is possible to densify fine cracks in a short time. Harmless to the human body.
powerful dust collector
This is an eco-friendly dust collector that has been repeatedly improved by our company so that it does not scatter dust when drilling concrete or cleaning. Lightweight type that can be carried with one hand with powerful dust collection power of 1 kW output. It is useful in narrow places, scaffolding, and places with a lot of equipment.
